If a customer wants an additional key adapted to his car. The normal diagnostic procedure requires that all adapted keys are available. Unfortunately your customer brought only one key along. At this point you have to send your customer away (and with him his money ...) Not with VAG dash CAN. You can add a key to the existing ones without erasing them and start the procedure with the new key and after some seconds it is adapted to the car. You don't have to wait 5 minutes for the adaptation channels to become reachable. This is about VAG DASH COM+CAN. There are some functions as follows:
1.read out trouble codes of CAN-ECU and erase them.
2. Recalibrate the odometer.
3. Read out the login / secret key code (SKC)
4.add keys to the car even though you don't have all existing keys available.
5. Write the vehicle identification number and the immobilizer number.
6. Do key adaptation without 5 minutes delay on new keys.
7. Download and store the entire immobilizer block decrypted.
8. Clone instrument clusters by writing the immobilizer block from a file.
Any questions? If you have interest in Car Key Programmer or Car Diagnostic Tools, you can visit obdii.
Have a nice day!
留言列表
